Quick links Servo Products Absolute Encoders Incremental Encoders TILT Sensors Wall Covering Sensors About us Servo Products Encoders Inclinometers Wall Covering EMI Sheilding Sensors Contact us     EMI Shielding Conductive Adhesive    Conductive Adhesive Type : 216/5    Technical Data Technical / Physical Date: Material Emulsion adhesive, high conductivity for copper, Aluminium and pewter foil, contains no solvents, odorless Based on : Artificial resin emulsion with special conductive pigments Color : Black Density : Approx.1.0 g/ml Gloss value : Mat Original viscosity : Approx.35.000 cps Brookfield RVT, Sp 6 10 r.p.m. 20 deg Processing viscosity : Glue in its original viscosity can be applied with a roller or a brush. Through thorough stirring the thixotropie is broken Thinner : If necessary add water, max. 5% Processing and Application Pneumatic-spraying : No Processing and Application Pneumatic-spraying : No Airless-spraying : Yes By roller : Yes By brush : Yes Pretreatment : The substrate has to be even, workable, clean and dry. Remaining paint and plaster must be removed. Allow new applied plaster to harden at least 14 days. An appropriate undercooating has to be applied on absorbing substrates. Storing The substrate has to be even, workable, clean and dry. Remaining paint and plaster must be removed. Allow new applied plaster to harden at least 14 days. An appropriate undercooating has to be applied on absorbing substrates.      Wall Covering  Processing Guidelines  Conductive Adhesive  Conductive Primers and Paints About us Servo Products Encoders TILT Sensors Wall Covering EMI Sheilding Sensors Contact us   Designed by Merven Technologies Best viewed on 1024*768          © KuSaBa Engineers Pvt Ltd., All Rights Reserved. Disclaimer