|
| Conductive Primers and Paints |
|
| Primer Type 131 |
|
| Technical/Physical Properties |
|
Data : |
|
Primer concentrate (3) |
|
|
|
Material |
|
Base thinnable with water, high conductivity, for mineral substrates, plaster-board not ferrows metals, contains no solvents, odorless |
|
|
|
Based on |
|
Acrylic-mixingpolymere artificial resin emulsion with special conductive pigments
|
|
|
|
Color |
|
Black
|
|
|
|
Density |
|
Approx.1.0g/ml
|
|
|
|
Gloss value |
|
Mat
|
|
|
|
Original viscosity |
|
Approx. 35.000 cps Brookfield RVT Sp 6, 10 r.p.m. 20 deg
|
|
|
|
Processing viscosity |
|
Stir concentrate thoroughly and add about 20% clean water
|
|
|
|
Thinner |
|
Water, approx. 20%
|
|
|
|
Material usage |
|
Approx. 150-200 g/m2 (Depending on substrate and material)
|
|
|
|
Cleaning of working equipment |
|
Immediately with water usage of house hold detergents can intensity the effect
|
|
|
|
Air Drying : |
|
Above 5 c
|
|
| Processing and Application |
|
pneumatic - spraying |
|
No
|
|
|
|
Airless - spraying |
|
Yes
|
|
|
|
By roller |
|
Yes
|
|
|
|
By brush |
|
Yes
|
|
|
|
Pretreatment : |
|
The substrate has to be even, workable, clean and dry.
Remaining paint and plaster must be removed. Allow
new applied plaster to harden for at least 14 days.
An appropriate undercoating has to be applied on absorbing substrates.
|
|
|
|
Storing : |
|
Keep dry and cool, but frost-free. Opened containers
sneed to be closed tightly. If thinned with water use as quick as possible.
|
|
|
 |