Quick links Servo Products Absolute Encoders Incremental Encoders TILT Sensors Wall Covering Sensors About us Servo Products Encoders Inclinometers Wall Covering EMI Sheilding Sensors Contact us     EMI Shielding Wrap around Shield for Cabels Material to shield round and flat cables Cable wrapping is used to shield cables and cable harnesses. It should be applied by bandaging the cable with 50% overlap, to provide a 2-layer shield. The cable wrapping should be grounded at both ends of the cable. Cable wrappings are supplied in continuous lengths, on a reel. Flat cables: Reinforced Aluminum foil This material gives the highest shielding performance for cable wrapping. It is used for cables with large diameters and flat cables. It comes provided with self-adhesive backing but is also available without self-adhesive. Heavy duty, low frequency: Wrapshield Wrap-shield is made of two layers of knitted wire mesh, with a nominal thickness of 0.4 mm. It is available in 5 standard widths: 12, 25, 50, 100 and 150 mm. 50 mm is the most common. It can be supplied in four wire materials: Monel, T.C.S, stainless steel, and aluminum. This material is a ready-to-use mu-copper or tinned mu-copper shielding tube, through which a cable or bundle of cables can be pulled. If the tube is compressed lengthwise, the diameter expands to simplify the assembly. Therefore a wide range of cable diameters can be shielded with a single tube. Please note that the tube has to be expanded for larger diameters and that a larger nominal length will then be required (up to twice the length of the cable).          Benefits    Options  High flexibility  Flame retardant version (only high volume)  High shielding performance  With self-adhesive backing  Wide range of applications  Easy to cut into the right shape           Electronic Systems  Conductive Gaskets  Honey Comb Mesh  Wrap Around Shield for Cables  O Profiles for Grooves  Clip on Gaskets  Conductive Tapes  D-Connector Adapter with built-in  filters  Feed Thru Connectors & Special EMC  Glands  Optical Transparent Mesh/ITO quoted  foils for display  Flat Shields  Customized Solutions including doors  for Special Enclosures  Enclosures & Printed Circuit Boards  Finger Strips         Rooms and Enclosure Systems  Wall Covering  Processing Guidelines  Conductive Adhesive  Conductive Primers and Paints About us Servo Products Encoders TILT Sensors Wall Covering EMI Sheilding Sensors Contact us   Designed by Merven Technologies Best viewed on 1024*768          © KuSaBa Engineers Pvt Ltd., All Rights Reserved. Disclaimer